Current location:Products >LLS-09 termite agent (Low smoke halogen free, PVC used)
Synthetic Capsaicin (Nonivamide)Rat proof plastic auxiliaryAnt proof plastic auxiliaryWater soluble chili oilOil soluble chili oilCapsaicin textile oil auxiliary
LLS-09 termite agent (Low smoke halogen free, PVC used)
LLS-09 termite agent (Low smoke halogen free, PVC used)

LLS-09 anti-ant products developed by our company are mainly composed of a variety of pyrethrins and carbamate. Its appearance is white powder, melting point: 86-90℃, decomposition temperature ≥200℃, stable to light and heat. The product has been tested by EU ROHS directive and SVHC for high concern chemicals. It is a kind of low toxicity, high efficiency, long half-life of anti-ant agent, has a strong touch effect, strong knockdown force, rapid efficacy, prevention and control termites is particularly effective. Widely used in PVC and low smoke halogen-free plastic coating. Recommended dosage: 0.6-1.0%

Notes:

1.As LLS-09 anti - ant products have certain toxicity, do a good job of protection when using.

2.In contact with skin, rinse thoroughly with soap and water.

Storage:

The product is sealed and stored in a cool, dry and ventilated place.

The mechanical properties of termite resistant PVC coating plastic were tested as follows:

Testing item

Standard required

Testing result

Single conclusion

1.Mechanical properties tensile strength before aging (N/mm2)

≥12.5

19.7

qualified

Elongation at break (%)

≥150

300

qualified

2.Air tank after aging

 

 

 

Temperature (℃) 100±2, times (h)168

 

 

 

Tensile strength (N/mm2)

≥12.5

21.7

qualified

Rate of change (%)

≤±25

+9.7

qualified

   Elongation at break (%)

≥150

 350

qualified

Rate of change (%)

≤±25

16.6

qualified

3.Thermo-gravimetric experiment

 

 

 

Temperature (℃)80±2, times (h)168

 

 

 

Weightlessness (%)

≤2.0

0.34

qualified

4.Cracking test

 

 

 

Temperature (℃)-, times (h)-

 

 

 

Testing result

no cracking

no cracking

qualified

5.High temperature pressure test

 

 

 

Temperature (℃)80±2, times (h)4

 

 

 

Deformation rate (%)

≤50

22

qualified

6.Low temperature impact test

 

 

 

Temperature (℃)-15±2

 

 

 

Testing result

no cracking

no cracking

qualified

Extrusion process is stable, fast exit speed, uniform plasticization, smooth surface, no visible air holes, no peculiar smell.

Back
Copyright (C) 2021,Tonglu Leitai Biotechnology Co., Ltd. (Liaoning Leitai Biotechnology Co., Ltd.) All Rights Reserved.Supported by ChemNet ChinaChemNet Toocle 31fabu Copyright Notice